Node00004 to do

From GigaTux Wiki

Revision as of 10:32, 2 July 2015 by Cocodude (talk | contribs) (Created page with "On the next reboot: ==Bridging== Make sure that the bridging is set up properly. This should be run in /etc/init.d/xen: ./network-bridge start bridge=xenbr0 netdev=eth0 an...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

On the next reboot:

Bridging

Make sure that the bridging is set up properly. This should be run in /etc/init.d/xen:

./network-bridge start bridge=xenbr0 netdev=eth0 antispoof=no 2>&1

IPv6

Make sure IPv6 comes up automatically. If /etc/network/interfaces doesn't bring it up, run:

/sbin/ip -6 addr add 2001:1B40:5600:0280::2/56 dev xenbr0
/sbin/route -A inet6 add default gw 2001:1b40:5600:200::1

DTC-Xen

Make sure this runs and stays alive.

Retrieved from "https://gigatux.com/wiki/index.php?title=Node00004_to_do&oldid=612"